Ignoring Warning Lights Could Cost You more In The Long Run and Raise Safety Issues.
Check Engine, Maintenance Required, ABS, SRS, various symbols and even warning chimes. What does it mean when they illuminate? and is it necassary to have your car checked out by a professional?
Even if the Engine is Running OK ,You Need to Get it Checked
In many cases the engine still seems to run fine with the light illuminated so the driver chooses to ignore it. We see this scenerio at our service counter often. In many cases the warning light can simply be reset but in others it indicates a computer system malfunction or a mechanical system fault that needs professional service to assure continued reliability.
Don’t Gamble On Your Car’s Safety & Reliability
Yes, we always recommend having your car checked out as soon as possible when any warning light illuminates. Warning lights illuminate to alert the driver that there is a system malfunction. Any system malfunction will quickly illuminate the corrosponding warning light and instantly put that particular system into backup mode.
Your Cars Computer is Very Smart
Backup mode is a “fail safe” designed to allow the vehicle to be safely driven to a service center within a reasonable distance. Continuing to drive the car may cause down stream problems and lead to greater repair costs.
We Are Glad to Sort Out Any Lightmare Your Car May Have
If you are confused about what a warning light or symbol means, check your vehicles owner’s manual or call us, we can give you some insight. We can also make repairs, if needed and turn off that annoying light. Waning lights always come on for a reason, have them checked out earlyon to save on long -term repair costs and arssure continued reliability of your car.
Drive away a little ‘greener.’
No matter what color you come in with, you’re leaving our collision shop a little ‘greener.’ That’s because we use high quality DuPont Cromax® Pro waterborne products that emit less volatile organic compounds than traditional solvent borne products.
Although waterborne paint is not yet required in Oregon, we believe in doing our part to reduce VOC emissions and protect the environment.
Serving You and Our Environment.
We believe that being a responsible steward of the planet goes hand in hand with being technologically innovative. Sikkens Autowave is a superior auto paint whose goal, like ours, is protecting the environment every day. Serving customers like you means delivering exceptional results in ways that are environmentally responsible.
What’s the Difference?
If you’ve heard of “waterborne” and “solvent-borne” paints you’ve probably wondered how they are different, and if choosing one means better results and the other means it is safer for the environment.
Solvent-based coatings use chemical compounds as the main solvent for thinning pigment solids. Although effective, this method releases Volatile Organic Compound (VOC) into the atmosphere. Waterborne coatings use water as the primary solvent which greatly reduces VOC emissions.
The Informed Choice.
By becoming a customer at A Street Automotive & Collision, you are making an informed choice—we are the first shop in the area to successfully make the switch to a waterborne paint system. We hope that by setting the bar high when it comes to environmental responsibility, others will begin to follow our lead.
You can feel proud when your vehicle is repaired at A Street Automotive using Sikkens Autowave, a waterborne paint system that is fully compliant with the strictest legislative regulations. We’d like to thank you for the important role you’re playing in protecting the environment.
Making the decision to keep your vehicle long term can be a wise one.
After your vehicle is paid off it can give you a return on your investment that is not available to consumers who simply trade their vehicles off. Not having a car payment can open the door to some new monthly revenue that was previously going out the door. This new-found money could be a lasting resource if you make the right decision to preventatively maintain your vehicle. This means that giving a little money back will keep your vehicle in dependable and eye-pleasing condition.
The common pitfall for many consumers who pay off their vehicles is that they forget to invest any money into their automobile. This scenario will certainly result in a major breakdown or a vehicle that is not eye-pleasing or comfortable. In these cases the owner usually trades the vehicle off and starts on a new payment book. There is no capital to be gained in this case.
It is a well known fact that most automobiles can be maintained at a very dependable level to over two hundred thousand miles. An approximate cost to maintain the average vehicle is about $1,200 to $1,400 per year. These figures can vary depending on the present condition of your vehicle. Doing preventative maintenance should result in 3 to 4 visits to a professional repair facility. Yes, this is a commitment but if you do the math it is well worth it.
To take the guesswork out of preventative maintenance, Factory Maintenance Schedules are available for your vehicle at our service counter, free of charge!
For most auto buyers, purchasing a used vehicle can feel like entering a Black Hole. One wrong move and there will be no “Return On Investment.”
We offer a comprehensive used vehicle inspection that will ward off even the deepest of Black Holes! The problem that we have found with vehicle inspections is that many people will not take the time to bring in a used vehicle for proper pre-purchase inspections. We are also aware that many purchases develop very quickly.
In an effort to give consumers some piece of mind we have a do-it-yourself used vehicle inspection form. Our form will allow you to ask the right questions and quickly inspect the critical areas of a used vehicle before purchasing it. This form will not take the place of our comprehensive inspections but it will allow you to hit all of the hot spots and make a much more informed decision to buy.
We have seen too many consumers go into the used vehicle Black Hole without any protection. The result can be a devastating automobile budget blow. Don’t let this happen to you: Stop by and pick up our inspection form, or call to have one faxed.
Tips on choosing the right octane for your vehicle duty.
The cost of gasoline is on the rise again. Why you ask? We won’t go into that, but what we will go into is fuel octane versus vehicle duty. With the rising cost of fuel many consumer are switching back to lower octane fuel to help offset the price. This is a more economical way to get you from point A to point B but can lead to costly repairs in some cases.
Higher octane fuels have more additives in them for cleaning and providing your engine with the potential to make more power. A more even and controllable flame front in your engines combustion chamber is what enables it to produce power well beyond the limits of standard unleaded fuel.
Before you fill you gas tank with low grade fuel the vehicle and the conditions under which it will be driven should be considered. Heavy duty towing vehicles should always use a higher grade fuel, without it costly internal engine damage can occur when the engine is under load. Light duty trucks and passenger cars should use a higher grade fuel whenever they are used under load conditions. Extra weight in the vehicle and steeper road grades can put a tremendous power demand on the engine, which makes it vulnerable to internal damage.
Here are some driving tips to help with your fuel economy:
[Actual fuel mileage is best determined by calculating the fuel consumed and mileage driven over three tanks of fuel or more.]
- Fill your tank fully each time, get your fuel at the same station each time (if possible) and use your normal driving habits.
- Cold weather and the use of oxygenated fuel will increase your vehicleÕs fuel consumption on a seasonal basis.
- Taking short trips of three miles or less will decrease your fuel mileage.
- Prolonged engine warm up periods and excessive engine idling will increase fuel use.
- Stop & go city driving will decrease fuel mileage appx. 17% below freeway driving.
- Freeway driving over the posted speed limit will decrease average fuel consumption by appx. 2.4 MPG for every 10 MPH increased above 40 MPH.
- Loading down your vehicle with extra passengers or weight will decrease fuel mileage, especially if you are driving on hilly terrain.
- Increasing the frontal area of your vehicle with even a light load will increase wind resistance, which will decrease fuel mileage accordingly.
- Installing bug deflectors and other add-on items increases wind resistance and decreases fuel mileage by approximately 1 to 2 MPG. Faster speeds have a greater effect on mileage when these components are installed.
- Driving your vehicle with the Check Engine Light in the instrument panel illuminated will cause poor fuel mileage and driveability issues.
- Driving with your left foot resting on the brake pedal even lightly will cause decreased fuel mileage and premature brake lining wear.
- Under-inflated tires will increase rolling resistance and cause a loss of up to one mile per gallon.
- Tires should always be inflated to manufacturer’s specifications.
Remember, with the high price of fuel even a small change for the positive in your driving habits could make a significant difference in your fuel bill each month.
ALL your tires need air.
One very commonly overlooked service item is the spare tire. Have you ever had the air in your spare checked? Do not wait until you need it, or you may have an unpleasant surprise!
Did you know? When defrost mode is selected, your air conditioning compressor is actively operating.
On cold mornings it is essential to operate your vehicle´s heater system in the defrost mode to clear the windows inside and out. In defrost mode the heating system should rapidly clear your windows for safe driving. If your vehicle has air conditioning it is important to know that when the defrost mode is selected the air conditioning compressor is engaged.
There are two reasons for running the air conditioning compressor in defrost mode. The primary reason for running incoming defroster air through the air conditioning system is the fact that it dries the moisture from the air and allows the windows to be cleared in a fraction of the time it takes a non air conditioned vehicle which must wait for the engine to warm first. The second reason is that running the air conditioning system allows the compressor and A/C components to lubricate throughout the year. This way the A/C system is ready in hot or cold weather with a minimum of corrosion-related breakdowns.
The main point of this article is to make you aware that if you have a vehicle with air conditioning you should only run it in the defrost mode when it is needed. If you are able to run your heating controls in the economy or normal heating mode and keep the windows clear, do so. This will save wear and tear on your vehicle´s A/C system and could potentially save you a lot of money in fuel cost by not running the horsepower-robbing A/C compressor.
Have you seen my ice scraper? This phrase is rapidly spreading through local homes as hundreds of Oregonians awake to the realization that a credit card and hair comb are not the most efficient tools for cleaning a frosted windshield. Winter has arrived! Those ice scrapers may never surface, but you can be prepared for the next wave of frosty winter weather.
A Street Automotive and Collision can’t help you find your ice scrapers, but we can offer you a Pre-Winter Service Package to increase your vehicle’s cold weather dependability.
The A Street Automotive Pre-Winter Package offers the following services for light vehicles:
- Coolant Condition & Freezing Level Test
- Starter Amperage Draw Test
- Alternator Output Test
- Battery Load Test
- Chassis Lube
- Oil & Filter Change
- Check & Fill All Levels
- Non-Freezing Windshield Water Fluid Added
- Clean & Protect Battery Terminals
- 27-point Vehicle Inspection
- Coolant System Pressure Test
- Inflate Tires To Proper Pressure
- Heater Output Test
- Wiper Blade Replacement
What to do when you find tracks left behind by our feline friends on your nice paint job?
It doesn’t take Grizzly Adams to find the tracks left behind cats on a vehicle’s paint job. Claw scratches and dirt scuffs are evident on any vehicle’s paint because cats like to cuddle up to vehicle like it’s a warm fire on a cool night. Short of a big dog we have not yet discovered a sure shot way to keep cats from jumping up on vehicles, but here are some tips for depleting the damaging effects.
- Keep your vehicle´s paint clean and waxed. This will make the surface slick and the coating is more resistant to damage.
- Hand glaze is a great alternative to wax. It will create the same results as wax but can be used more often. Too much wax causes a problematic build up.
- Purchase and use a good quality car cover. This is the ultimate protection but might not be very practical for your daily driven vehicle.
Although claw scratches on your vehicle´s finish are annoying we can remove them using a professional buffing process. Keeping your vehicle´s finish clean and waxed will most likely eliminate the scratches completely.
On another note, cats also like to sleep in the warm engine compartment of vehicles. Many felines have met their maker when the engine is started. An under the hood check is recommended before starting your vehicle if you know that cats have been present.
Did you know? Your exhaust system can start fires.
When you are on your summer outings, don´t forget that your car’s exhaust system is equipped with a catalytic converter that has internal temperatures exceeding 2,000 degrees F. Although it’s well insulated and shielded, it’s still extremely hot externally.
If your exhaust system comes in contact with any combustible material, it will almost certainly catch on fire. Take care not to park anywhere that weeds and tall grass will touch your exhaust system.